TYLINK
Innovative Security Solution!

TYLINK is a new concept in high security link-locking methods and is designed to replace conventional padlock and chain-link arrangements. It is also designed to provide far greater physical security than the traditional systems and represents a quantum leap forward in both quality and strength.

Conventional hardened alloy steel chain up to Ø13mm (ؽ”) can still be cut with 1050mm (42”) bolt cutters, as can 11mm triple heat treated Boron Manganese Hex-Chain steel links. The TYLINK has proved resistant to these bolt cutters.

Also, this steel chain is often coupled together with a number of padlocks to create multiple entry points. This is low security at the best, as this locking arrangement could be broken into at a number of points with hand tools. Also the site manager would have little or no idea as to who holds the keys to the padlocks, or how many keys there are in circulation. Good security is not only the level of resistance to physical attack but good key control as well.

The TYLINK 2000 & 3000 solve these problems, as they are both ‘purpose built’ to increase the security of gates. A padlock cannot be added to the linkage to put in an additional lock point, so the site manager can always have key control. This is more so when the lock cylinder is upgraded to a restricted key system or to a higher security keying system as authority is needed when an additional key is required.

TYLINK uses a revolutionary in-line link design that incorporates Outer, Inner and End Links. The Outer and End Links are Ø25mm (Ø1”) and the Inner Links are Ø19mm (Ø3/4”). All are turned out of solid manganese steel bar and hardened to provide an armoured casing to cover and protect a flexible, aircraft grade, steel cable. The Inner and Outer Links are beaded over this steel cable, which is then sealed into the End Links to provide maximum strength as well as a degree of flexibility and articulation. All the Links are chrome plated for good corrosion resistance.

TYLINK is designed to provide a high degree of resistance to prying, hacksawing and bolt cutters and is available in a number of lengths ranging from 45cm (1.5ft) to 360cm (12ft) and with two lock models. All TYLINK products have been tested to AS 4145.2 and AS 4145.4 Australian Standards for Physical Security and Durabilty ratings (where applicable), and to AS 2331.3.1 for a corrosion resistance rating of C4 (high).

 

TYLINK 2000

The TYLINK 2000 is designed to be mounted onto a gate, wall, frame or even onto the ground. - uses a 25mm dia in-line link system made from hardened manganese steel to cover a flexible steel cable. - steel cable is aircraft grade with a breaking force of 3.3 tonnes. - highly resistant to 105cm (42") bolt cutters. - chrome plated to resist corrosion.

- available in a number of lengths ranging from 60cm (2ft) to 360cm (12ft).
- screws are not accessible when locked.
- key-in-knob style lock cylinder either standard C4 broach or higher security Disc Key (DK).
- both lock cylinders are supplied with two keys.
- can be upgraded with most high security cylinder systems.

 

TYLINK 3000

The TYLINK 3000 is a portable model that allows the secure locking of gates and hard-to-lock items such as motorcycles, jet-skis, trailers, caravans and portable machinery to fixed objects, posts or a dedicated anchor such as the TYLINK 360 ground mounted anchor. - uses a 25mm dia in-line link system made from hardened manganese steel to cover a flexible steel cable.

- steel cable is aircraft grade with a breaking force of 3.3 tonnes.
- highly resistant to 105cm (42") bolt cutters.
- chrome plated to resist corrosion.
- available in a number of lengths ranging from 45cm (1.5ft) to 360cm (12ft).
- screws are not accessible when locked.
- key-in-knob style lock cylinder either standard C4 broach or higher security Disc Key (DK).
- both lock cylinders are supplied with two keys.
- can be upgraded with most high security cylinder systems.

 

TYLINK 360

The TYLINK 360 is available as an auxiliary item and is designed to be mounted onto a concrete floor to provide a secure anchor point for the TYLINK to be run through.

- the body is cast in 316 grade stainless steel.
- features a hardened steel insert that resists hacksawing.
- supplied with two 12mm dia x 75mm long masonry bolts.
- rated at a 20kN (2 ton) pullout force.
- the TYLINK links are purchased separately.

 

TLD2000

The TLD2000 is ideal for securing a number of items at once including motorcycles, trailers, caravans or portable machinery, in-line, without the need to wrap the TYLINK back around and is available in a number of lengths ranging from 180cm (6ft) to 360cm (12ft).

This model uses two of the TL2000 Mounted lock styles, and allows for the locking of the TYLINK links in both of the locks, in the top link hole. A Blind Link is provided with both of the locks for securing the bottom link hole, once the lock body has been mounted. Also the security of the link system can be increased with the inclusion of a TL360 Anchor.

Mounting can be to a concrete base or to a solid metal frame by a number of methods including:

* 8mm DynaBolts (not 8mm TruBolts as the socket wrench will not fit the cavity in the TL2000 lock body).
* 8mm Loxin Anchors (the 8mm Loxin bolt needs to be replaced with a 8mm Socket Head screw).
* An 8mm thread being tapped into a metal frame and secured with 8mm Socket Head screws.
* Securing with a variety of gate screws including the Ø6mm ones provided.

A.J. EDDEN PTY LTD
ABN: 11 000 091 690